SIMPLE INSTALLATION COMPLETE SOLUTIONS BEST VALUE & WARRANTY
Unirac E-BOSS is a complete line of electrical balance of systems components which integrate with Unirac’s PV Mounting Solutions. Full integration between the mounting system and electrical accessories significantly improves the installation experience and ensures every part is covered by Unirac’s industry-leading 25-year full system warranty.
To be 100% sure you get every install 100% perfect, insist that your entire system is 100% Unirac!
WIRE MANAGEMENT: SOLARTRAY
Ditch the clips with SOLARTRAY, a high-speed DROP & GO wire management solution which secures wires and connectors with continuous support for the ultimate protection against loose cables, failed inspections and service calls. Use RAILTRAY for wire runs parallel to rails and BRIDGETRAY for runs perpendicular to rails.
MODULE LEVEL POWER ELECTRONICS: MLPE MOUNT
UNIRAC’s MLPE Mount bonds and secures microinverters and power optimizers to module frames with a simple bonding pin. Increase your productivity by installing module level power electronics before lifting modules to the roof. UL2703 Recognized.
Quickly mount conduit with this multi-purpose component. Accommodating both 1” and 3⁄4” conduit, this versatile mount can be quickly attached direct to the roof deck using an included flashing and hardware or mounted to a Rail or L-foot using a T-bolt. Simply install the mount and click its cap in place to secure the conduit.
A quick fix for mounting junction boxes up to 6” x 6” in size, Unirac’s universal J-BOX MOUNT attaches to Rail and L-Feet, no tools needed. Fasten the junction box to the J-BOX MOUNT, then press the mount into place.
Featuring Flashloc Technology, SOLOBOX saves you time and labor on the roof by limiting shingle cutting and prying nails on attic runs. For rail-mounted applications, SOLOBOX mounts quickly to Unirac’s J-Box Mounting Bracket and has a low-profile design to sit under the panels (where permitted). The box itself can support 2 attic pass-throughs and features a hinging lid, a single captive screw, pre-drilled weep holes, and an option for a pre-assembled din rail.
E-BOSS VIDEO GALLERY
Find out more about E-Boss Electrical Accessories.
E-BOSS LEARNING CENTER
Check out the library of Quick Tips videos and see how easy it is to install E-BOSS Electrical Accessories.
HAVE A CLOSER LOOK AT UNIRAC E-BOSS
RAILTRAY supports wire runs parallel to Rail and extends the width of a 60-cell module in portrait orientation.
BRIDGETRAY supports wire runs perpendicular to Rail and extends the length of a 60-cell module in portrait orientation.
For microinverters and power optimizers, compatible with all module frame heights.
Pairs with included flashing to secure 3⁄4” and 1” conduit to roof deck, or attaches directly to L-Foot or Rail.
Press in place and secure J-Boxes up to 6” x 6” in size to Rail or L-Foot.
Universal for roof or rail mounting. Installs quickly and seals with Flashloc Technology – no more notching shingles, tearing up nails, and damaging the roof.
STAY CONNECTED SIGN UP FOR UPDATES